Repair fitting – THERMO HLK-12SR

HAELOK® focuses on its own development of fittings and tools, ensuring high quality and innovation for the customers. All from a single source.

Repair fitting THERMO – HLK-12SR

Product description

The HAELOK®-THERMO-Fitting “SR” (Straight Repair Fitting) is used for a straight connection of two district heating pipes. Due to the missing stop bar the fitting can be moved over the whole pipe to carry out repairs.

The fitting consists of a total of three fully assembled components; a base body and two press rings. The press fitting can be ordered in steel 1.0570 (AISI 1024) galvanized.

The STRAIGHT FITTING is available in sizes from ø13.5 mm – ø 114.3 mm.

HAELOK® Product code
HLK – 12SR – 20 – CC

THERMO – Technical specifications

The HAELOK®-THERMO system is specially optimized for high pull-out forces, temperature changes and for use with district heating pipes. According to current draft AGFW FW 449:2020.

  • Temperature range from + 140°C to current draft AGFW FW 449:2020
  • Nominal pressure 2.5 Mpa to current draft AGFW FW 449:2020
  • Pipe diameter from ø20 – ø 114.3 mm
  • Technical useful life of at least 30 years
  • Can be used for seamless and welded tubes according to
    – EN ISO 10216-1, 2 and 5
    – EN ISO 10217-1, 2 and 7
    – EN ISO 1127 / EN 10220 / EN 253

 

Base body and press ring made of carbon steel 1.0570 + electrolytically galvanized

d DN Article No. p I e z Weight (g)
20   HLK-12SF-20-CC          
1/2″ 15 HLK-12SF-21-CC          
25   HLK-12SF-25-CC          
3/4″ 20 HLK-12SF-26-CC          
28   HLK-12SF-28-CC          
1″ 25 HLK-12SF-33-CC          
1 1/4″ 32 HLK-12SF-42-CC          
1 1/2″ 40 HLK-12SF-48-CC          
2″ 50 HLK-12SF-60-CC          
2 1/2″ 65 HLK-12SF-76-CC          
3″ 80 HLK-12SF-88-CC          
4″ 100 HLK-12SF-114-CC